Equipment Rental and Management ERM

Rental and full operations management of Liquid Mud Plants (LMP), mud dehydration systems, filter presses, decanting centrifuges, Thermal Desorption Units (TDU), tanks, skips, mini containers, and EN12079 CCU baskets for drilling and production sites — delivered by Lamor–BEOS with ISO 9001/14001/45001 IMS, API/DNV compliance, and turnkey O&M crews.

Executive Scope

Single contract for equipment hire, mobilization, operations, maintenance, and demobilization.
Process design, commissioning, and on‑site performance monitoring to meet solids‑control and disposal specs.
24/7 operations crews, spare parts, and preventative maintenance for maximum uptime.
Documentation, traceability, and compliant logistics for wastes, consumables, and recovered fluids.

Service Modules (End‑to‑End)

1. Engineering & Mobilization

Process review, layout and tie‑ins; lifting plans and site readiness checklist
Shipping, customs, heavy‑lift/rig‑up; pre‑start inspections and SAT/FAT records
Commissioning protocols, performance baseline, handover to O&M

2. Operations & Monitoring

Run plans for each unit (LMP, mud dehydration, centrifuge, filter press, TDU)
Critical parameters tracking (flow, density, viscosity, differential pressure, temperature)
Daily operations logs and shift reports; optimization and troubleshooting

3. Maintenance & Reliability

Preventative maintenance schedule (PM), spares holding list, critical spares on site
Lubrication, alignment, vibration checks; calibration of instruments
Breakdown response, root‑cause analysis, corrective actions

4. Compliance & Permits

Equipment certification (e.g., EN 12079 for CCUs, pressure tests for tanks)
ATEX/IECEx conformity where required; SDS files and labeling for chemicals
Waste movement notes, manifests, and chain‑of‑custody where applicable

5. HSEQ

JSA/PTW, confined‑space/LOTO where applicable; ergonomics and lifting safety
Gas detection (H₂S/LEL/NH₃/VOC) near mud/waste processing; spill control and fire protection
Tool‑box talks, site inductions, and competency matrix for operators

6. Logistics & Consumables

Bulk fluids, barite/bentonite and chemicals supply coordination
Skips/baskets rotation, covered transport, and wash‑down
Fuel, power, water balance, and emissions/noise management

7. Demobilization & Handover

Cleaning/decon, inspections, and packing lists
Asset condition reports, utilization summary, and lessons‑learned
Site restoration and final sign‑off

Fleet Catalogue

Liquid Mud Plant (LMP)

Mixing tanks, agitators, shear mixers, dosing/skid pumps, density/viscosity control
Automated batching & recirculation; inline QC; transfer to rig/tanks

Mud Dehydration System

Coagulation/flocculation modules, clarifiers or dewatering units
Targets TSS reduction for reuse/discharge compliance (per permit)

Filter Press (plate & frame)

Cycle‑based dewatering of sludges; cake dryness for transport/disposal
Polymer dosing integration; filtrate quality monitoring

Decanting Centrifuge

High‑G cuttings separation; adjustable pond depth and feed control
Optimizes oil‑on‑cuttings and recovers base fluid

Thermal Desorption Unit (TDU)

Direct thermal treatment for oily cuttings/sludges; controlled off‑gas handling
Recovers oil and produces treated solids for disposal per spec

Tanks (frac/weir/buffer)

Temporary storage and equalization; manifolded transfers and level control
Periodic integrity checks, pressure/vacuum relief per design

CCUs: Skips , Mini Containers, Tanks, Baskets

Tarpaulin covered cuttings skips, waste skips, mini containers for segregated streams
Lids, drain points, and tracking IDs; covered transport
Certified cargo units for offshore/yard logistics; rigging certified
Visual and NDT inspections per schedule; documentation included

Compliance

ISO 9001/14001/45001 Integrated Management System
API, EN 12079 where applicable; ATEX/IECEx compliance for hazardous areas
Manufacturer manuals, calibration certificates, and inspection records maintained on site
Waste handling aligned with national regulations and client permits

HSEQ

PTW/JSA; LOTO and confined‑space procedures for tanks and TDU
Gas detection near processing; spill kits, firefighting and eyewash/shower stations
Noise, lighting, and ergonomics surveys; environmental monitoring as requested

Deliverables

Mobilization plan, lifting plan, P&IDs/layouts, and commissioning reports
Daily operations logs, QC sheets (density/viscosity/TSS/etc.), KPI dashboard
Maintenance & inspection logs; calibration certificates
Waste/transfer documentation and chain‑of‑custody (if applicable)
Utilization and performance summary; demob condition reports

Commercial Model

Daily/weekly rental rates per unit with minimum hire period
Mobilization/demobilization, cranage, and transport at cost + agreed handling
O&M crew day‑rates (shift coverage); fuel, power, chemicals & consumables as pass‑through
Optional performance bonuses/LDs linked to KPIs (by agreement)